Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Washington, NC

Soft Washing in Washington, NC

Low-pressure cleaning with a mild solution that kills mold, mildew and algae on siding, roofs and other delicate surfaces without damaging them. Typical cost $300-$800.

Grime, mildew and stains build up a little at a time until one day the outside of your property looks years older. Soft Washing in Washington, NC brings it back, usually in a single visit.

The right method for the job

Soft washCleaning method

Signs you need soft washing

  • Green, black or gray film on siding, especially on the north side
  • Black streaks running down the roof
  • Moss or lichen on shingles or tile
  • A musty smell around shaded walls
  • Pressure washing would damage the surface

Where the grime comes from

  • Algae, mold and mildew that grow in shade and humidity
  • Roof algae that feeds on the limestone filler in shingles
  • Pollen and dust that give growth something to hold on to
  • Sprinklers and gutters that keep walls damp

Safe steps for homeowners

  • Trim back branches and shrubs that touch the house so walls can dry
  • Keep gutters clear so water doesn't overflow down the siding
  • Spot-clean small areas with a soft brush and mild detergent
  • Aim sprinklers away from the house

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Why more pressure isn’t better

  • Using too strong a mix, which can burn plants and fade surfaces
  • Using too weak a mix, which leaves growth alive and it returns quickly
  • Climbing ladders with a spray wand and chemicals
  • Mistaking soft washing for 'pressure washing on low'

How we handle soft washing

  1. Identify the surfaces and the type of growth
  2. Pre-wet plants, cover sensitive fixtures and close windows
  3. Apply a solution mixed for the surface and let it dwell
  4. Rinse at low pressure from the top down
  5. Rinse plants again and check every side with you

Typical soft washing prices

$300-$800Typical range for a typical single-family home exterior
2-4 hoursTypical time on site
Every 1-2 years for siding, every 3-5 years for roofsRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Soft Washing in Washington, NC

Mildew and algae are the main reason North Carolina homeowners wash their siding. Shaded walls can turn green within months, and pressure alone doesn't kill the growth, so we use a soft wash solution that does.

Parts of North Carolina are exposed to hurricanes and tropical storms. After a storm, washing removes mud, debris and salt spray from siding, screens and walkways. Check for damage first: loose siding, broken screens and roof damage need repair before anyone washes them.

Near the coast, salt air leaves a film on siding, windows, screens and railings that dulls finishes and speeds up corrosion on metal. Regular rinsing and washing help protect them.

Spring pollen season in North Carolina coats houses, cars, screens and patios in a yellow-green film, and pollen gives mildew something to feed on. Many homeowners book their wash after pollen season ends so the house stays clean longer.

Red clay soil is common in parts of North Carolina. Rain splashes it onto the bottom of the siding, walls and walkways, and its iron-rich color can stain light surfaces. It usually needs a dedicated clay or rust cleaner rather than pressure alone.

Crews serve all of Washington (ZIP code 27889), plus River Road (4.4 mi), Greenville (18.2 mi), Winterville (19.7 mi) and Ayden (21.1 mi). Call (555) 010-0000 for a free quote in Washington.

Soft Washing: frequently asked questions

How much does soft washing cost in Washington, NC?

Soft Washing typically costs $300-$800 for a typical single-family home exterior, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for soft washing?

Soft Washing is done with soft wash. Low pressure and the right solution remove growth and dirt without damaging the surface, and the growth takes longer to come back.

Is soft washing safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule soft washing?

Every 1-2 years for siding, every 3-5 years for roofs. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Washington, NC

Exterior Mold & Mildew Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $250-$700

Oil Stain Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $100-$300

Exterior Mold & Mildew Removal for Wood Siding

Soft wash. Painted and stained wood siding grows mildew and loses its finish faster on the shaded and weather-facing sides.

Typical $250-$700

Oil Stain Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $100-$300

Concrete Sealing for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $400-$1,200

Deck Cleaning for Cedar

Low-pressure wash. Cedar decks and fences turn silver-gray as the surface weathers.

Typical $250-$600

Exterior Mold & Mildew Removal for Composite Decking

Low-pressure wash. Composite decking doesn't need staining, but it does grow mold and mildew, especially in shade and between boards.

Typical $250-$700

Patio Cleaning for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $150-$400

Sidewalk & Walkway Cleaning

Walkway, front path and sidewalk cleaning that removes slippery growth, gum and grime.

Typical $100-$250

Pre-Paint Washing

Washing siding and trim before painting or staining so new paint bonds to a clean surface.

Typical $250-$600

Commercial Pressure Washing for EIFS (Synthetic Stucco)

Soft wash. EIFS looks like stucco but is a foam insulation board with a thin acrylic finish coat.

Typical $400-$2,000

Parking Lot & Garage Cleaning

Cleaning parking garages, lots and loading areas to remove oil, grime, gum and litter.

Typical $500-$3,000

Ready for a cleaner home or business?

Get a free pressure washing quote in Washington, NC. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote